How much clearance do you need for a pocket door?

Check That You Have Enough Space A pocket door requires a �sleeve� inside the wall to retract into. For a traditional 32-inch-wide interior door, you’ll need at least 66 inches of linear wall space: 32 inches for the door and the rest for the housing.

What is the rough opening for a pocket door?

The open doorframe should be twice the width of the intended door slab, plus 1 inch. So, the rough opening for a 30-inch door slab should be 61 inches. Height should be the vertical length of the door slab, plus the thickness of the door track and desired clearance (about 1 inch, though product dimensions vary).

How much wall space do you need for a 30 inch pocket door?

about 64 inches

While the specifics will depend on which pocket door frame you wind up purchasing, most pocket doors require a few inches more than double the width of the door opening. So, for a 30-inch door, plan about 64 inches of wall space.

How much space do you need for a 24 pocket door?

Consider Pocket Door Dimensions

Double the width of the desired door, or pair of doors, to determine the wall space that’s needed to install the pocket door frame. For example, 48 inches is needed to install the frame for a 24-inch pocket door, and 64 inches is need to install the frame for a 32-inch pocket door.

How big does the track need to be for a 30 inch pocket door?

Series 1 – Heavy Duty Pocket Door Kit with Pre-Cut Track and Hardware (30 inch Door- Track Size- 56 3/4 inches)

Do I need a 2×6 wall for a pocket door?

For an average 32″ pocket door, a wall opening double that size is needed.

Do pocket doors require thicker walls?

If you make a wise choice and select Johnson Hardware’s version of hardware for installing a pocket door – the minimum wall thickness is 4�1/2? assuming 1/2? drywall on both sides of the wall. The hardware, tracks and steel studs will occupy 3�1/2?, just like a 2×4 stud wall without any drywall attached.

Can a pocket door go in a 2×4 wall?

The 1500 Series Universal Pocket Door Frame is an easily assembled, premium quality commercial/residential kit for installing a pocket door into a 2×4 stud wall. The frame can be cut down to accept door sizes between 24 in. to 36 in.

Do pocket doors meet ADA requirements?

In addition, the hardware on the door must be operable with no tight pinching or twisting of the wrist. For this reason, ADA hardware is designed with pulls or levers that protrude from the door to ensure accessibility. In a pocket door setting this means that the door must extend into the opening.

Do pocket doors take up more space?

Pocket doors are great space savers. Since they slide open into the wall cavity, they save space by eliminating the need for the clearance that a hinged door requires to swing open. You can use that extra wall space for anything you like.

What’s the rough opening for a 32in pocket door?

For a 32? pocket door, you will need rough opening to twice the width + 1 inches wider & 4-1/2? taller than the actual door size, so, if you are installing a 32? wide and 80? tall or 32?�80? pocket door, the rough opening will be 65? wide and 84-1/2? tall.

What is the rough opening for a 2 foot pocket door?

The rough opening width should equal two times the door width plus 1� (25.4mm). For example, a 30� (76.2 cm) door multiplied by two equals 60� (152.4 cm) plus 1� equals 61� (154.94 cm) rough opening width.

Does pocket door need to be bigger than opening?

�One thing to bear in mind is that you need more than the width of the door itself to form the pocket to receive the door when open. This is where telescopic systems can come into their own.�

Recommended Articles